• Home
  • About
  • Trades
    • Metal
    • Stone
    • Construction
    • Automotive
  • Products
  • Stockists
  • Contact
  • Home
  • About
  • Trades
    • Metal
    • Stone
    • Construction
    • Automotive
  • Products
  • Stockists
  • Contact
Home  > Metal Working  > FLEX 2100 Watt Angle Grinder, 180mm
Support Product data sheet

FLEX 2100 Watt Angle Grinder, 180mm

Robust motor housing and gearbox housing. Stable and robust steel

RRP : $299.00

Categories: Metal Working

SKU: L21-8-180 Category: Metal Working Tag: Angle grinders
Buy Now OnlineFind a store
Max. disc diameter 180 mm
No load speed 8300 rpm
Power input 2100 watt
Power output 1250 watt
Tool fixture M 14
Clamping collar Ø 64 mm
Cable length 4.0 m
Size (W x L x H) 495 x 101 x 135 mm
Weight 5.2 kg

1 guard grinding 180 Ø ·
1 SoftVib handle ·
1 clamping flange ·
1 clamping nut M14 ·
1 pin wrench

  • Robust motor housing and gearbox housing. Stable and robust steel
    gearbox as well as a spindle bearing protected by a metal cap also increase reliability and durability
  • Ergonomically designed and very slim motor housing provides optimum
    guidance and handling. An additinal vibration damping ring between the motor housing and rear handle reduces the
    vibrations
  • SoftVib handgrip for reduced vibration can be mounted in three
    positions.
  • Rear shaft handle with soft padding for secure grip
  • Switch: with lock-off / lock-on switch
  • Restart protection after power interruption
  • Soft-start: for a soft start without power overloading
  • Spindle lock
  • Tool-free adjustment of safety guard
  • Disc guard cover for cutting guard (446.718), as an optional
    accessory

Similar
Products

More
  • FLEX 1700 Watt Angle Grinder With Brake, 125mm

    Microprocessor control with soft start, restart protection after power failure, overload protection, CDC-electronic feedback control Highly…

    Learn more
  • FLEX Variable-Speed 1700 Watt Angle Grinder With Brake, 125mm

    Microprocessor control with soft start, restart protection after power failure, overload protection, CDC-electronic feedback control With…

    Learn more
  • FLEX 125mm Extraction hood with removable edge segment

    Learn more
  • FLEX 2400 Watt Angle Grinder T-Rex, 230mm
    COMING SOON

    Microprocessor control with soft start, restart protection after power failure, overload protection, CDC-electronic feedback control Anti-Kickback…

    Learn more
  • TRINOXFLEX Brushing Machine Set

    Unique tool attachment with quick-action coupling for tool-free change of the system attachments: for burnishing, pipe…

    Learn more
  • TRINOFLEX Pipe Belt Sander And Belt File Set

    Microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload…

    Learn more
  • FLEX 100mm x 85mm Steel stranded wire brush – Suits BBE 14-3 110

    Learn more
  • FLEX SDS-Clic quick-clamp nut – Suits L21-8 180 / L26-6 230 Grinder

    Learn more
  • FLEX 110mm x 85mm Nylon brush – P46 – Suits BBE 14-3 110

    Learn more

    • FLEX - this is
    proformance

    Join our mailing list
    Newsletter sign-up
    Register my product Warranty Information

    2025 © FLEX

    Privacy Policy Terms and Conditions
    Warranty Informarion

    NEED
    HELP?

    For all FLEX warranty and enquiries, please contact Australia 1300 000 346
    or New Zealand 0508 000 346

    Chervon Australia Pty Ltd ABN 36 165 077 501 and Chervon New Zealand Subsidiary Ltd NZBN 9429049277616 (“Chervon”) warrants to the original purchaser that this product will be free from defects in materials and workmanship for 2 years from date of purchase. An additional 1 Year (For a total of 3 Years) warranty is available with registration via www.flex-tools.com.au or www.flex-tools.co.nz within 30 days of the original purchase. To make a claim, return the faulty item together with proof of purchase directly to your closest service agent or to the place of purchase. Any handling and transportation costs (and other expenses incurred in claiming this warranty) are not covered by this warranty and will not be borne by Chervon Australia or Chervon New Zealand. The replacement product or part or repaired product will be made available for your collection at an address nominated by Chervon Australia or Chervon New Zealand. Where a valid warranty claim is made by the original purchaser of the product, Chervon Australia or Chervon New Zealand will replace the defective product or repair the fault. Where the product is repaired, Chervon Australia or Chervon New Zealand may use refurbished parts. This warranty does not cover normal wear and tear, misuse, abuse, or continuous industrial use. This warranty only applies to product purchased by you, inside Australia or New Zealand from authorised Australian or New Zealand FLEX dealers. This warranty may also be further limited or voided as specifically detailed in the product Manual. Chervon Australia or Chervon New Zealand has no other liability under this warranty. The benefits to you given by this warranty are in addition to other rights and remedies imposed by State and Federal legislation that cannot be excluded. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law and the New Zealand Consumer Guarantee Act 1993. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Rd, Rowville, VIC. 3178. Chervon New Zealand Subsidiary Ltd, 4th Floor, Smith & Caughey Building, 253 Queen St, Auckland, 1141

    Phone Number: Australia 1300 000 346

    New Zealand 0508 000 346

    Email Address: support@flex-tools.com.au

    www.flex-tools.com.au www.flex-tools.co.nz

    FLEX 30 DAY MONEY BACK GUARANTEE
    If you are not satisfied with your purchase of a FLEX product in Australia or New Zealand for any reason, you can return it within 30 days from date of purchase for a full refund provided you have purchased it from an authorised FLEX Dealer.

    TERMS & CONDITIONS
    The FLEX product must have been purchased from an authorised FLEX Dealer. The product must be returned at the purchaser’s expense to the Dealer it was originally purchased from. The product must be returned no later than 30 days after the date of purchase. The proof of purchase (invoice / receipt) needs to be presented when returning the product. All items listed on the packing list in the user manual of the product must be returned. If the product was purchased as a KIT, the original battery and charger must be returned with the product. The returned product can have signs of being used, but needs to be clean, free of debris, stains and markings. If the product or any of the items supplied are returned damaged, missing, or in an unusable and/or poor condition (manufacturing defects excluded), the authorised Dealer may refuse a refund. If the product has been purchased as part of a promotion all parts received in the promotion must be returned in their original condition. The refund excludes any postage, handling or transportation costs. This offer excludes accessories, batteries and chargers sold separately and is non-transferable and applies only to the original purchaser.

    FLEX REFRESH – FIRST 12 MONTHS TUNE UP
    FLEX products can receive a tune up in the first 12 months if the product has been registered online within 30 days of the original purchase date.

    TERMS & CONDITIONS
    The first 12 months product refresh only relates to products, it is not available on accessories, batteries, or chargers. This offer is a once only opportunity. The product must be registered online within 30 days of original purchase to be approved for the product refresh. The product refresh must be completed within a 30-day period from the 12 months anniversary date, failure to do so voids this offer. The end-user needs to contact FLEX to find the location of the nominated agent to conduct the product refresh. Standard review and tune up will be conducted, any repair work to be conducted under warranty needs to be reviewed and approved. Any work conducted not covered by warranty will need to be quoted.
    Actual work carried out will be dependant upon the product and the condition it is in and can be discussed at the time of making the booking.

    Phone Number

    Australia
    1300 000 346
    New Zealand 0508 000 346

    Email Address

    support@flex-tools.com.au

    Website

    www.flex-tools.com.au
    www.flex-tools.co.nz