• Home
  • About
  • Trades
    • Metal
    • Stone
    • Construction
    • Automotive
  • Products
  • Stockists
  • Contact
  • Home
  • About
  • Trades
    • Metal
    • Stone
    • Construction
    • Automotive
  • Products
  • Stockists
  • Contact
Home  > Construction & Renovation  > FLEX Wall And Ceiling Sander With Interchangeable Head System
Support Product data sheet

FLEX Wall And Ceiling Sander With Interchangeable Head System

RRP : $1,899.00

Categories: Construction & Renovation

SKU: GE7MHO Category: Construction & Renovation Tag: Wall & ceiling sanders
Buy Now OnlineFind a store
Power input 710 watt
Power output 410 watt
No load speed 1100-1650 rpm
Sanding disc Ø 225 mm
Tool fixture hook-and-loop
Tilt angle on the head 100 °
Cable length 5.0 m
Weight 4.2 kg

1 velcro sanding disc supersoft ·
1 clip-on quick clamping ring ·
1 carrying bag

  • Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
  • Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
  • Easy guiding: by optimal balance between motor and sanding head
  • Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head is reduced to a minimum. This facilitates handling.
  • Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.
  • Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
  • Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
  • Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
  • Dust-proof on/off switch
  • Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
  • According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
  • Very large areas and rooms up to 3.40 m in height can be processed thanks to the optional application of the GM 340
  • The innovative, textile transport system allows the machine and accessories to be transported effortlessly. It does not have to be mounted and is immediately ready for use

Similar
Products

More
  • FLEX Wall And Ceiling Sander

    Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions Easy…

    Learn more
  • FLEX Velcro triangle sanding paper SELECTFLEX – P40 – 20 Pack

    Learn more
  • FLEX 500mm Extension – Suits GE5 / GE7

    Learn more
  • FLEX Safety Vacuum Cleaner With Automatic Filter Cleaning System, 42 L, Class H
    COMING SOON

    Adapter plate for fixing L-BOXXes and Tanos systainers on the head of the vacuum cleaner The…

    Learn more
  • FLEX Auxiliary handle – Suits GE5 / GE7 / GEMH

    Learn more
  • FLEX Velcro triangle sanding paper SELECTFLEX – 5 X P80-P180 – 25 Pack

    Learn more
  • FLEX Padded Supersoft adapter for velcro paper – Suits GE5 / GE7 / GEMH

    Learn more
  • FLEX Velcro triangle sanding paper SELECTFLEX – P16 – 10 Pack

    Learn more
  • FLEX 125mm Extraction hood with removable edge segment

    Learn more

    • FLEX - this is
    proformance

    Join our mailing list
    Newsletter sign-up
    Register my product Warranty Information

    2025 © FLEX

    Privacy Policy Terms and Conditions
    Warranty Informarion

    NEED
    HELP?

    For all FLEX warranty and enquiries, please contact Australia 1300 000 346
    or New Zealand 0508 000 346

    Chervon Australia Pty Ltd ABN 36 165 077 501 and Chervon New Zealand Subsidiary Ltd NZBN 9429049277616 (“Chervon”) warrants to the original purchaser that this product will be free from defects in materials and workmanship for 2 years from date of purchase. An additional 1 Year (For a total of 3 Years) warranty is available with registration via www.flex-tools.com.au or www.flex-tools.co.nz within 30 days of the original purchase. To make a claim, return the faulty item together with proof of purchase directly to your closest service agent or to the place of purchase. Any handling and transportation costs (and other expenses incurred in claiming this warranty) are not covered by this warranty and will not be borne by Chervon Australia or Chervon New Zealand. The replacement product or part or repaired product will be made available for your collection at an address nominated by Chervon Australia or Chervon New Zealand. Where a valid warranty claim is made by the original purchaser of the product, Chervon Australia or Chervon New Zealand will replace the defective product or repair the fault. Where the product is repaired, Chervon Australia or Chervon New Zealand may use refurbished parts. This warranty does not cover normal wear and tear, misuse, abuse, or continuous industrial use. This warranty only applies to product purchased by you, inside Australia or New Zealand from authorised Australian or New Zealand FLEX dealers. This warranty may also be further limited or voided as specifically detailed in the product Manual. Chervon Australia or Chervon New Zealand has no other liability under this warranty. The benefits to you given by this warranty are in addition to other rights and remedies imposed by State and Federal legislation that cannot be excluded. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law and the New Zealand Consumer Guarantee Act 1993. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Rd, Rowville, VIC. 3178. Chervon New Zealand Subsidiary Ltd, 4th Floor, Smith & Caughey Building, 253 Queen St, Auckland, 1141

    Phone Number: Australia 1300 000 346

    New Zealand 0508 000 346

    Email Address: support@flex-tools.com.au

    www.flex-tools.com.au www.flex-tools.co.nz

    FLEX 30 DAY MONEY BACK GUARANTEE
    If you are not satisfied with your purchase of a FLEX product in Australia or New Zealand for any reason, you can return it within 30 days from date of purchase for a full refund provided you have purchased it from an authorised FLEX Dealer.

    TERMS & CONDITIONS
    The FLEX product must have been purchased from an authorised FLEX Dealer. The product must be returned at the purchaser’s expense to the Dealer it was originally purchased from. The product must be returned no later than 30 days after the date of purchase. The proof of purchase (invoice / receipt) needs to be presented when returning the product. All items listed on the packing list in the user manual of the product must be returned. If the product was purchased as a KIT, the original battery and charger must be returned with the product. The returned product can have signs of being used, but needs to be clean, free of debris, stains and markings. If the product or any of the items supplied are returned damaged, missing, or in an unusable and/or poor condition (manufacturing defects excluded), the authorised Dealer may refuse a refund. If the product has been purchased as part of a promotion all parts received in the promotion must be returned in their original condition. The refund excludes any postage, handling or transportation costs. This offer excludes accessories, batteries and chargers sold separately and is non-transferable and applies only to the original purchaser.

    FLEX REFRESH – FIRST 12 MONTHS TUNE UP
    FLEX products can receive a tune up in the first 12 months if the product has been registered online within 30 days of the original purchase date.

    TERMS & CONDITIONS
    The first 12 months product refresh only relates to products, it is not available on accessories, batteries, or chargers. This offer is a once only opportunity. The product must be registered online within 30 days of original purchase to be approved for the product refresh. The product refresh must be completed within a 30-day period from the 12 months anniversary date, failure to do so voids this offer. The end-user needs to contact FLEX to find the location of the nominated agent to conduct the product refresh. Standard review and tune up will be conducted, any repair work to be conducted under warranty needs to be reviewed and approved. Any work conducted not covered by warranty will need to be quoted.
    Actual work carried out will be dependant upon the product and the condition it is in and can be discussed at the time of making the booking.

    Phone Number

    Australia
    1300 000 346
    New Zealand 0508 000 346

    Email Address

    support@flex-tools.com.au

    Website

    www.flex-tools.com.au
    www.flex-tools.co.nz